GUIDE 01 / CHOOSING 304, 316 OR 202 STAINLESS STEELChoose for the environment. Not just the finish.

A practical starting point for discussing stainless steel grades 304, 316 and 202 with your fabricator.

THE MATERIAL MAKES THE DIFFERENCE

Same shape.
A different future.

The finish catches your eye.
The material earns your trust.

Find the right stainless

THE MATERIAL LABMATERIAL COMPARISON

Illustrative comparison of a clean stainless steel channel and a rusted uncoated carbon steel channel

STAINLESS STEELSelected for its application

UNCOATED CARBON STEELIllustrated with rust

Illustrative material render

For wet preparation and regular cleaning, discuss 304 with your fabricator. The finish, welds and cleaning routine matter too.

Illustrative comparison, not a timed corrosion test. Stainless can corrode; grade, exposure, fabrication and care all matter.

START WITH HOW YOU’LL USE IT

Where will it work?

Select the closest setting to prepare for your consultation.

A CONVERSATION STARTER

Discuss 304

A common starting point for kitchen fabrication. Confirm the intended use, cleaning chemicals, thickness and construction details.

A starting point, not a final material specification. We’ll review the application with you.

BEFORE YOU SPECIFY

Three questions worth asking.

What will touch the surface?

Tell your fabricator about water, food, salt and cleaning chemicals. The same finish can behave differently in different environments.

What grade and thickness are included?

Ask for both in the quotation. Grade describes the material; thickness and construction must also suit the dimensions, load and use.

How will it be made and maintained?

Discuss joints, drainage, access for cleaning and the final finish. Material selection and fabrication quality work together.

STRAIGHT ANSWERS

Good questions.
Clear expectations.

From the first measurement to the final payment, here’s what to expect.

Speak with our team

Can stainless steel still rust?

Yes. Stainless steel resists corrosion, but the wrong grade, chloride exposure, contamination, trapped moisture or poor cleaning can still cause staining and corrosion. Match the material to the environment and maintain it properly.

Does a shiny finish prove the stainless grade?

No. Appearance alone cannot establish the grade. Ask for the material specification and supporting supplier documentation instead of relying on shine or a simple magnet test.

Is grade 316 always necessary?

No. The correct choice depends on the conditions. Grade 316 offers greater resistance to chloride-related corrosion than 304, but even 316 has limits. Discuss salt exposure, cleaning chemicals and the installation environment before specifying a material.

How long will my project take?

Many projects take around 1–2 weeks, but this is an estimate, not a fixed promise. Lead time depends on what you need, the size and complexity of the work, and the agreed project scope. We will discuss the schedule with you before work begins.

Is the quotation free?

Yes. Requesting a quotation is free. Send your requirements, reference photos and approximate measurements, or arrange a site visit with us.

Is delivery free?

Yes, delivery within NCR is free. For locations outside NCR, ask us to confirm delivery availability and any charges in your quotation.

Do you offer a free ocular visit and equipment measurement?

Yes. We offer a free ocular visit and equipment measurement. Contact us with your project location so we can arrange the visit.

What are your payment terms?

Work commences upon a 50% downpayment. The remaining 50% is paid after the work is finished.

Is E.V.A a registered business?

Yes. E.V.A is registered with the DTI and BIR. If you need copies for procurement, contact us and we'll share them on request.

YOUR LOCAL FABRICATION TEAM

Find us in
Santa Cruz, Manila.

Visit the workshop, talk through your ideas, and see where your project begins. Contact us to arrange a visit.

COME SAY HELLO

EVA Metal Products Trading

1671 Pampanga St., Santa Cruz, Manila
Near Blumentritt

Open in Google Maps Arrange a visit: 0976 072 2116

FROM OUR GOOGLE MAPS LISTING

A few words from our customers.

4.5/ 5Based on 2 Google reviews

Montgomery Alexander Tan

Google review

Google Maps

“Mabait and madali kausap ang mga owners pati employees.”

View on Google Maps

Edimar Alzadon

Google review

Google Maps

This customer left a star rating without a written review.

View on Google Maps

Both public reviews are shown as checked on 27 September 2026. Ratings and reviews may change. See the latest on Google Maps.

YOUR NEXT PROJECT STARTS HERE

Let’s make
something lasting.

GIVE US A CALL0976 072 2116 CALL / VIBER0935 972 7705 DROP US AN EMAILevametalproductstrading@gmail.com VISIT THE WORKSHOP1671 Pampanga St., Santa Cruz, ManilaNear Blumentritt · Contact us to arrange a visit